Shipping Container Corner Lock STUMP

Shipping Container Corner Lock Stump
 
CUSTOM MADE TO ORDER – Contact us with your project detail for a quote
 
COMPONENTS
 
TOP - CORNER LOCK
The Container Lock top is designed to fix into the corners of a container’s transport lock to provide a secure engineering approved construction.
The engineered top plate is secured inside the corner castings and then locked in from underneath by the lower adjustable plate Hot Dipped Galvanised M30 x 280mm Thread 20mm Top Plate & 10mm Locking Plate
Only require a large shifter to adjust through a range of 120mm.
 
CONNECTOR- Screw On
SHS Screw on sleeve to suit Suits 75mm / 89mm / 100mm SHS 
Hot Dipped Galvanised
Easy to attach with 4 Tek screws
Suits 75mm / 89mm / 100mm SHS
10mm top plate
 
STEEL POSTS
SHS 75mm / 89mm / 100mm
 
3 BASE TYPES
 
Concrete In
Hot Dipped Galvanised
Easy to attach with 4 Tek screws
Suits 75mm and 89mm SHS
6mm Baseplate
Note: The holes on the side are not for bolting down but are there in-case reo-bar is to be attached to the base.
 
Bolt Down (4 Hole)
The base plate bolt down onto concrete pier where additional strength is required. 
A 14mm bolt clearance hole on each corner of the baseplate (4 Bolts) gives you greater stability than the 2 Hole variant. 
Installation is straightforward using a chemical anchoring fastener.
Hot Dipped Galvanised
Easy to attach with 4 Tek screws
Suits 75mm / 89mm / 100mm SHS
10mm Baseplate
 
Bolt Down (2 Hole)
The base plate bolt down onto concrete pier. A 14mm bolt clearance hole on each side of the stump (2 Bolts) allows for easy installation to existing concrete pads using a chemical anchoring fastener.
Hot Dipped Galvanised
Easy to attach with 4 Tek screws
Suits 75mm / 89mm / 100mm SHS
8mm Baseplate